wink
lodge member
Posts: 29
|
Post by wink on Apr 10, 2007 8:31:23 GMT -4
Hey all...
I've been using a wrist strap, caliper style release for years now, but I've been thinking about using a T-handle release for the next year. Does anyone on here use one of these? Any pros and cons you'd care to share? I've been looking at the Tru-Fire and Tru-Ball Hunter and Diamond releases.
|
|
|
Post by bfisher on Apr 10, 2007 13:55:15 GMT -4
There are tons of good T-handle ones around. I've used a Cascade model 8 for many years. One criteria I use is how the handle fits my hand. Most are just too big for my little hands. Another is that I don't like one with a long head on it as this stretches me out too far and accuracy goes to h3ll. One thing I do not consider is price. If a release fits me well and has features such as a short hookup, a clean crisp release with lots of adjustabliity then I may try it. Good releases cost money. I've got 5 that range in price from $100 to $200+ If you are interested in one for string loop use then Carter makes a bunch, and Cascade has their Saturday Night Special. Try them. Don't rush into it.
One nice advantage they have is that for hunting one can be attached and left on the string while in stand. Less fumbling around when you have to hook up. It's already hooked up.
|
|
wink
lodge member
Posts: 29
|
Post by wink on Apr 10, 2007 14:21:14 GMT -4
One nice advantage they have is that for hunting one can be attached and left on the string while in stand. Less fumbling around when you have to hook up. It's already hooked up.
This is exactly why I was looking to get one of the T-handles! I don't know how many times I've had deer "sneak" up on me only to fumble around looking for the D loop without actually looking at it... Very frustrating!
Thanks for the information! I use a D-loop instead of a string loop... Any suggestions there?
Thanks again!
|
|
|
Post by bfisher on Apr 10, 2007 23:46:39 GMT -4
As long as you ask I'll give this answer. Do yourself and your equipment a favor and get rid of the metal loop. I could go into a bunch of rhetoric about them but it's been covered ad nausium on forums such as ArcheryTalk.com
Just let it be said that there are way more cons than pros for the metal loop. And a few of them are safety related. Things like string breaking under the loop (I've seen this). Screws coming loose and nasty pieces flying around the eyes. More noise and possibly cables getting beat to death by it. Speed loss of about 5-8 fps.
If you get a good tied-on loop you negate most of the "loop related" problems. And if you have a release with good jaws on it you will only have to replace a loop about once a year, if that often.
I'll not dictate what you should use. Just a comparison. I told you I've been using a Cascade model 8 for about 8 years. This one uses a rope that loops around the serving and butts right up against the bottom of the nock. I'VE REPLACED THE ROPE ONE TIME IN EIGHT YEARS. Just pointing out that loop rope does not just break and/or wear out that easily.
|
|
wink
lodge member
Posts: 29
|
Post by wink on Apr 11, 2007 7:32:46 GMT -4
I haven't been at this archery game long enough to consider myself a pro by any means, so any and all information, observations, and opinions are more than welcome and are greatly appreciated! I appreciate your time and your explanations very much!
I was actually thinking about going to a string loop, but I didn't know much about them at all. I actually went to the D loop just for those reasons you suggested NOT using them (serving wear, etc...). I will definitely look much deeper into the string loop now that I think about how many times I've had to tighten those little screws and just how little those screws really are to be holding that much torque.
Thanks again!
|
|
|
Post by XMan on Apr 11, 2007 11:14:48 GMT -4
BFisher is correct I feel about the string loop. A lot of archers prefer them. They state the release is a lot crisper and arrow flight is less disturbed. I've only had one break on me, but that was my fault. It should have been replaced months before it failed. As stated in a hunting situation you can attach your release to the loop and be ready if that big buck steps into your shooting lane. No fumbling around trying to attach a release. I've found that my bow was easier to tune also with the string loop. As long as your serving is tight and doesn't move on you. Your nocking point should remain constant. If tied correctly the loop will seed itself into the serving and will not move. Make sure a competent tech installs it for you until you become more familiar with this setup. I also place a serving nock just over the top and bottom of the nock then install the loop above and below this nock set. If the string nock set is installed properly you can twist these up or down the serving for fine tuning.
|
|