|
strings
Dec 28, 2007 21:08:27 GMT -4
Post by mrlongbeard on Dec 28, 2007 21:08:27 GMT -4
who's brand of strings do you use for replacement on your bow. so far have only tried winner,s choice. but plan on replacing the strings and cables on my guardian this summer.
|
|
|
strings
Jan 1, 2008 10:17:32 GMT -4
Post by tedlebo on Jan 1, 2008 10:17:32 GMT -4
In my opinion, H&M Bowstrings, are every bit as good as WC at about half the price. I have them on two bows right now, and my next bow will get them. Mike is a Pa. boy, also. Check his site, or give him a call. You won't regret it.
hmbowstrings.com mpriester@pghmail.com 724-434-2085 724-366-0324
Ted
|
|
|
strings
Jan 1, 2008 19:52:30 GMT -4
Post by mrlongbeard on Jan 1, 2008 19:52:30 GMT -4
will check him out
|
|
|
strings
Jan 1, 2008 21:38:17 GMT -4
Post by bfisher on Jan 1, 2008 21:38:17 GMT -4
I have used Winner's Choice and Prostrings from the bigger aftermarket makers. My most recent set is from a guy called Bucknasty on www.archerytalk.com. His quality is the equal of the other two, but at about half the cost. From what I gather H&M is starting to make a name for themselves. The problem I run into is that about the time I should be replacing strings I am usually getting a new bow. About the only reason I get new strings is if I get a poor set from the factory or want to change the color of what's on the bow. I will say, though, for most people one of the best things they can do with a new bow is replace the strings right from the git-go if the company has in-house strings on them. Sure some strings will shoot in after a few hundred shots, but some just keep on creeping. To keep the bow in proper tune the shooter has to retune periodically or have it done, retwisting string/cables that are continually creeping. Best thing to do is get a good set of aftermarket strings and not have to go through all this. Most good ones have a break-in period of 50 shots or less. After this you install your peep, tune the bow, take necessary measurements, and get to shootin. Periodically you recheck your measurements to ensure things are not changing, but most times things are fairly stable. It's a good feeling knowing that your bow's tune will not change over any appreciable amount of time.
|
|
|
strings
Jan 1, 2008 21:41:54 GMT -4
Post by mrlongbeard on Jan 1, 2008 21:41:54 GMT -4
that the problem with the new bows you pay all that money and get second rate strings.
|
|
|
strings
Jan 2, 2008 12:14:45 GMT -4
Post by XMan on Jan 2, 2008 12:14:45 GMT -4
In case you guys have forgotten I still make strings. Haven't heard any complaints yet as far as string stretch etc.
|
|
|
strings
Jan 2, 2008 12:56:19 GMT -4
Post by jeffpahunter on Jan 2, 2008 12:56:19 GMT -4
Something I think many people may overlook or may not be aware of is the differences in performance from one string to another in addition to the obvious life span. Performance variations are mostly driven by the characteristics of the varying types of material used. Some materials inherently stretch more than others but are quieter and often builders use more strands of such material to minimize the creep or stretch. The extra strands add weight which slows the string down robbing the bow of some speed. Make a string out of a material with minimal creep and you can reduce strands to lighten the weight and increase speed but these same characteristics MAY increase noise as well as the life span. Some of this depends on the particular bow as well as the arrow being used of course.
From testing I've seen strings on the same bow change speed by as much as 10-15 fps and also noise change by as much as say 6-8 db's which is a lot on the scale noise is measured at.
Much of it depends on the shooters needs and requirements, hunter, target archer etc.
|
|
|
strings
Jan 13, 2008 12:31:49 GMT -4
Post by XMan on Jan 13, 2008 12:31:49 GMT -4
Jeff I have to agree. You have to do a little testing with different maybe plus or minus 2 strands. Take notes on the speed gain or loss and the increased or decrease in the noise levels. Start with the recommended strands and go from there. Also don't forget to wax the string and cable(s). This is very important to prevent your string from fraying and possibly blowing up. It will improve the life of the string. When not using your bow keep it stored in room temperatures. This will prevent limb twist and dry rot of the string. When I build strings and cables I put them through a vigorous 24hr minimum high torque stretch. I've never had a problem with my bow going out of tune or peep rotation. If you purchase new strings especially Zebra and Winners Choice. Not knocking them but I have found them to stretch a bit. If you stretch them prior to putting them on your bow you will find that your so called no stretch strings won't stretch on you when that trophy or 3D Title is on the line.
|
|
|
strings
Jan 13, 2008 18:36:20 GMT -4
Post by mrlongbeard on Jan 13, 2008 18:36:20 GMT -4
if you increase or decrease the number of strands. i assume it will change how the nock grips the string . so do you go with thicker severing to off set or change nocks
|
|
|
strings
Jan 14, 2008 10:30:17 GMT -4
Post by XMan on Jan 14, 2008 10:30:17 GMT -4
Yes you might have to go with a thicker serving if you decrease the strands. You should be able to nock an arrow, turn the bow with the arrow pointing in a downward position and lightly tap the string and the arrow should come off. Not to loose though. And you might have to go to a larger throated nock if you add strands. Like I said do some experimenting to see what works and what doesn't. Keep thorough notes on your changes.
|
|