|
Post by xtrememxrider on Jan 17, 2008 18:49:35 GMT -4
I am interested in replacing my truglow sight due to the fact that their so big. I looked around but cant find and little sights. All the replacement sights are truglow. I would like a regular type rifle sight or some thing with a fine pin point bead. Does any one know where to get one or if they even make one.
|
|
|
Post by skwirl on Jan 17, 2008 19:53:15 GMT -4
|
|
|
Post by skwirl on Jan 17, 2008 20:23:13 GMT -4
Try e mailing traditions with your concerns I recently had a problem with my sight on my Pa Pellet also made by traditions and they sent me a new rear sight with a lower ramp
|
|
|
Post by zimmerstutzen on Jan 18, 2008 11:23:23 GMT -4
NEarly anyone that sells muzzleloader building companents has a dozen different style sights. Dixie Gun Works, Track of the Wolf, etc.
|
|
|
Post by whitetail101 on Jan 18, 2008 12:45:51 GMT -4
I replaced my Tru-glo on my TC Firestorm early last year with a peep sight when they became legal for flintlock season(I can't shoot v-notch sites for crap ) I got it through Cabelas and love it, I removed the disk as the hole was too small for my liking. good luck
|
|
|
Post by willyhuntsdeer on Jan 18, 2008 14:19:23 GMT -4
on those peep sites, can you drill them out so they are a little bigger?
|
|
|
Post by encore28 on Jan 18, 2008 14:59:52 GMT -4
Take a look at RMC's V-Peep sight--------I love mine
Encore28
|
|
|
Post by whitetail101 on Jan 18, 2008 16:33:51 GMT -4
on those peep sites, can you drill them out so they are a little bigger? it's easier to just unscrew the disk and use the hole where the disk screwed in as the peep, works great for me.
|
|
|
Post by alton2 on Jan 18, 2008 19:14:54 GMT -4
I agree with the RMC V peep. The original sight was becoming a blur. I replaced it with RMC V-peep and what a difference. I never shot a peep sight before in my life. I can shoot the flint lock again.
|
|
|
Post by xtrememxrider on Jan 21, 2008 18:43:38 GMT -4
Thanks guys
|
|
|
Post by bob1961 on Jan 24, 2008 22:25:09 GMT -4
here's a peep sight i'm doing on my lancaster build....the red lines are what i ground off to open the area around the sight to see the target better......................bob ...
|
|