woody
lodge member
Posts: 232
|
let off
Dec 15, 2007 13:59:30 GMT -4
Post by woody on Dec 15, 2007 13:59:30 GMT -4
have a 06 martin slayer x with c cams was wondering can i change the let off mods?it says hl on the mod
|
|
|
let off
Dec 17, 2007 12:47:17 GMT -4
Post by XMan on Dec 17, 2007 12:47:17 GMT -4
Woody the person you might want to ask that question is BFisher. He's on the Marting Pro Staff.
|
|
|
let off
Dec 17, 2007 13:44:36 GMT -4
Post by bfisher on Dec 17, 2007 13:44:36 GMT -4
Woody the person you might want to ask that question is BFisher. He's on the Marting Pro Staff. I'm right here. Thanks Kevin. Woody, the only other option for the Nitrous cams is 65% modules. If you order them they are marked 65% so there is no mistake about it. The HL mods are supposed to be 75%, but that is effective let-off. You're probably feeling more like about 72% at full draw (my experience) whereas the 65% will be more like 62%. Now, this was on a B base cam so it may be slightly different on the C base. There is no module presently giving a higher letoff if that's what you seek. The differene between the two is only about 2-3# of holding weight anyway. What I like to do is use the 65% and just drop the peak weight about 5#. You get almost as much speed, but the draw feels smoother, as if the Nitrous could draw smoother for a speed cam. You'll have to order them through a dealer though. Hope this helps.
|
|
woody
lodge member
Posts: 232
|
let off
Dec 17, 2007 18:42:39 GMT -4
Post by woody on Dec 17, 2007 18:42:39 GMT -4
THANKS BFISHER ILL GIVE MARTIN A CALL!
|
|